File Formats

Reference for the binary and textual formats of the files aMule reads and writes. These are the files that are not meant to be edited by hand: their on-disk layout is documented here for developers, integrators, and expert users who need to parse, repair, or build aMule's data files.

For the editable configuration files (amule.conf, remote.conf), see the aMule Files Reference in the User Manual — editing those is a user task, so their key reference lives there. The same registry lists every file aMule creates, with a one-line description and a link to its format here.

To inspect a real file against the layouts documented here, use the fileview console tool, which dumps the decoded contents of most of these binary files.

Files with a dedicated page

The most complex formats have their own reference pages:

• server.met — eD2k server list
• nodes.dat — Kademlia contacts (bootstrap)
• clients.met — credit ledger
• emfriends.met — friends list
• Temporary download files — *.part, *.part.met, *.part.met.seeds

The remaining formats are documented inline below.

preferences.dat

In early eMule versions this file stored all user configuration. In current aMule it stores only two fields: the configuration file version and the userhash.

The userhash is a 128-bit value that uniquely identifies a client on the eD2k network. It is used for credit tracking and, when combined with cryptkey.dat, for Secure User Identification.

Format

The userhash is stored as 16 raw bytes, exactly as-is — it is not an integer, so byte order does not apply to it. The version is a single byte (no endianness either).

Offset	Size	Field	Description
0	1 byte	Version	Config file version — currently 0x14 (decimal 20)
1	16 bytes	Userhash	128-bit client identifier, stored as 16 raw bytes (as-is)

Total size: 17 bytes.

Example

14 2C 16 62 17 9C 0E CE 02 45 55 A8 5A 56 6C 6F 49

Decoded:

• Version: 0x14 = 20
• Userhash: 2C1662179C0ECE024555A85A566C6F49

preferencesKad.dat

Stores the client's IP address and its Kademlia ClientID. Both are used to identify the client on the Kad network.

Format

Offset	Size	Field	Description
0	4 bytes	IP	Client IP address, little-endian (LSB first)
4	2 bytes	Deprecated	Unused, always 0x0000
6	16 bytes	ClientID	128-bit Kademlia ID (special encoding, see below)
22	1 byte	End-of-tags	Always 0x00 (for compatibility with old eMule clients)

ClientID encoding: The 128-bit value is stored as four 32-bit little-endian integers, which together represent the value in big-endian order. aMule ignores the end-of-tags byte when reading, but writes it for compatibility.

Example

01 40 52 5B 00 00 B4 F1 52 14 18 17 9A 80 44 57 29 8A B9 3A 2B 6F 00

Decoded:

• IP: 0x5B524001 → 91.82.64.1
• Deprecated: 0x0000
• ClientID: 1452F1B4809A17188A2957446F2B3AB9
• End-of-tags: 0x00

cryptkey.dat

Contains the client's 384-bit RSA private key, used for Secure User Identification. This key is unique to each client and is generated automatically the first time aMule runs.

The key is the RSA private key in DER (PKCS#1) form, Base64-encoded and wrapped at 72 columns — that is, raw Base64 without the PEM -----BEGIN/END RSA PRIVATE KEY----- header lines. For a 384-bit key this produces 5 lines of 72 characters each, with the last line followed by a newline character.

Example

M22BCQIBADANBgkqhkiG9w0BAQEFAASB9DCB8QIBAAIxALuwVap2WUdpELRZr2VhbqoHE+P5
aiGwS1Euc8d/8kxiUK0hkYMV4YcLdeAWHQpQywIBEQIwIR8eLSPxozComEwP5LbXSy5s6/7W
fmpnV4yti/lG9SsmShKwoK1ySii9YAPnMXUhAhkA2+W8tYcsF5lm+a+Sm8H6Kkh0zW1xr9Lz
AhkA2oDfo3Q0HNRmD7LArieBObwlR+fil5JCAhkAjklb/P0ch72c++oTkfX8OXotdd1nrgD3
AhhzraOSxQyHu72P1xq2jX1wv9eAa7QyH3kCGQC7jgzTqW+wGGP/Bll2YXu8bRYphVTVZgo=

aviso

This file contains your private key. Never share it. If it is compromised, anyone can impersonate your client on the eD2k network.

staticservers.dat

A text file listing eD2k servers that should always be treated as static servers. When aMule loads, entries from this file override matching entries in server.met. This file is never modified by aMule.

Format

One server per line:

Host:Port,Priority,Name

• Host — IP address or hostname
• Port — TCP port
• Priority — 0 (normal), 1 (high), 2 (low). Any other value defaults to normal.
• Name — display name; if empty, Host:Port is used

Lines beginning with / or # are treated as comments and ignored. Any line that does not contain exactly three comma-separated fields is ignored.

Example

# My local test server
127.0.0.1:4662,1,LocalHost

# LAN server
192.168.0.1:4661,0,LAN server

# Low-priority server
20.19.18.17:9666,2,Backup server

addresses.dat

A plain-text list of URLs from which aMule downloads server.met files on startup (if the "Update server list on startup" preference is enabled). The downloaded lists are merged into ~/.aMule/server.met.

Format

One URL per line. Supported schemes: http://, https://, ftp://.

Example

https://some.whe.re/server.met
http://another.file/my_preferred.met
ftp://localhost/fastservers.met

known.met

Binary file that caches the hashes, names, sizes, modification dates, priorities, and notes of shared files. This prevents aMule from having to rehash every shared file each time it starts — a significant time saving for large files.

The file begins with a 1-byte header: 0x0E (MET_HEADER), or 0x0F (MET_HEADER_WITH_LARGEFILES) when the list contains files larger than 4 GiB. It is followed by a 32-bit unsigned, little-endian record count, and then one variable-length block per file. Each block's length depends on the number of metadata tags stored. Updated whenever a file is hashed and when aMule shuts down.

known2_64.met

Binary file that stores the verified AICH hashes of shared files. Supports large files (64-bit sizes). This is the successor to the deprecated known2.met; aMule migrates the old file on first load.

The file begins with a 1-byte version header (0x02). Each entry that follows stores the AICH root hash (20 bytes, SHA-1), a 32-bit unsigned record count of block hashes, and then that many 20-byte block hashes.

canceled.met

Binary file storing the MD4 hashes of all downloads the user has cancelled. When a file appears in a search result but its hash is listed here, aMule marks it with a distinct colour to indicate it was previously cancelled.

Format

Offset	Size	Field	Description
0	1 byte	Magic	Always 0x21 — identifies a valid canceled.met
1	4 bytes	Count	Number of hashes stored (32-bit unsigned, little-endian)
5	16 × Count	Hashes	MD4 hash of each cancelled file, 16 bytes each

Shared directory files

aMule uses three related files to track shared directories: shareddir-explicit.dat, shareddir-recursive.dat, and the derived shareddir.dat.

File	Purpose
shareddir-explicit.dat	Canonical. Non-recursive roots: only the immediate files in each listed directory are shared (subdirectories are not included).
shareddir-recursive.dat	Canonical. Recursive roots: aMule expands each listed directory to include all subdirectories.
shareddir.dat	Derived. Union of the expanded contents of the two canonical files. aMule regenerates this file automatically on every save. External tools that only know shareddir.dat (e.g. old scripts or older aMule versions) can still read it.

When aMule starts and neither shareddir-explicit.dat nor shareddir-recursive.dat exists (fresh install or migration from an older version), all entries in shareddir.dat are loaded as explicit (non-recursive) shares. This is the safe default for migration.

Format

All three files use the same format: one absolute directory path per line, UTF-8 encoded.

Example

shareddir-explicit.dat:

/home/user/Music
/mnt/share/books

shareddir-recursive.dat:

/mnt/downloads

shareddir.dat (regenerated union — includes /mnt/downloads and all its subdirectories):

/home/user/Music
/mnt/share/books
/mnt/downloads
/mnt/downloads/series
/mnt/downloads/series/season1

ipfilter.dat and ipfilter_static.dat

Text files containing the IP ranges that aMule blocks or allows. ipfilter.dat is the main list (auto-updatable); ipfilter_static.dat holds custom overrides that aMule never modifies. For how to enable and configure IP filtering, and where to download ipfilter.dat, see the aMule Files Reference and Preferences → Security → IP-Filtering.

Format

One range per line. aMule accepts two line formats:

PeerGuardian format (the common one, compatible with eMule):

RangeStart - RangeEnd , AccessLevel , Description

AntiP2P format (the description precedes the range; the access level is implicitly 0):

Description : RangeStart - RangeEnd

A range is blocked when its AccessLevel is less than the configured Filtering Level (FilterLevel, default 127); equal or higher levels are allowed. Because AntiP2P entries default to access level 0, they are always blocked at any filtering level above 0.

Lines beginning with # are comments. Malformed lines are skipped and logged.

ipfilter_static.dat uses the exact same format, with two differences:

1. Precedence: entries in it override conflicting entries in ipfilter.dat.
2. Immutable: aMule never modifies it. Use it for custom IP ranges that must survive auto-updates.

Default comment block

When aMule creates ipfilter_static.dat for the first time, it includes the following header:

# This file is used to store ipfilter-ranges that should
# not be overwritten by aMule. If you wish to keep a custom
# set of ipfilter-ranges that take precedence over ipfilter-
# ranges acquired through the auto-update functionality, then
# place them in this file. aMule will not change this file.
#
# Format:
# "IPs range" , "Access level" , "Description"
# Access level values < 127 are blocked
# Access level values > 127 are allowed
#
# Example:
# RangeStart - RangeEnd , NNN , Text
# 000.000.000.000 - 000.255.255.255 , 000 , invalid ip

ED2KLinks

A plain-text interface for sending commands to a running aMule instance. As soon as aMule detects that this file exists, it reads it, processes each entry, and deletes the file. The interface is one-directional (write-only from the user's perspective).

Format

One ed2k:// link per line. The file must end with a newline after the last entry.

A line containing only RAISE_DIALOG tells aMule to raise its window if it is minimized.

Example

ed2k://|file|Mandrake%20Linux%2010.0-Official-Powerpack-Cd1%20i586.iso|722343936|13048F2EC3B917E33BB9593D956E81AC|/
ed2k://|file|Knoppix%20v3.6-2004-08-16-En.iso|733499392|E1A848648CF99A2295909799FA45F0A8|/
ed2k://|file|debian-30r1-i386-binary-2.iso|676495360|557B59750976519476DA071BDF79A014|/

This mechanism is used by browser plugins and the ed2k command-line tool to pass links to a running aMule session.

amulesig.dat

aMule's status signature file. It is written periodically by aMule to inform external applications — such as cas, wxcas, and IRC bots — of the current state of the running aMule instance. Location: ~/.aMule/amulesig.dat.

amulesig.dat is the native aMule format and is a superset of eMule's onlinesig.dat. It carries considerably more information across 17 lines, while onlinesig.dat provides only 2 lines of basic status for compatibility with older eMule utilities.

Format

The file is plain text, one field per line, written through wxWidgets' text-file facility (wxTextFile). Line endings are therefore the host platform's native ones — LF (\n) on Linux, macOS and BSD, and CRLF (\r\n) on Windows — and a trailing newline follows the last (17th) line. Note that the fixed sentinel blocks aMule emits while connecting or after a clean shutdown embed literal \n separators regardless of platform, so on Windows such a file can mix \n and \r\n; parsers should split on \n and strip a trailing \r.

Line	Field	Values	Notes
1	ED2K connection status	0 = disconnected, 1 = connected, 2 = connecting	Value 2 introduced in aMule 2.0.0-rc4
2	Server name	Server name string, or 0	0 when offline, connecting, or cleanly closed
3	Server IP	Server IP address string, or 0	0 when offline, connecting, or cleanly closed
4	Server port	Server port number, or 0	0 when offline, connecting, or cleanly closed
5	Client ID type	H (High ID), L (Low ID), or 0	0 when disconnected, connecting, or cleanly closed
6	Kademlia status	0 = disconnected, 1 = connected (firewalled), 2 = connected (ok)	Introduced in aMule 2.1.0
7	Download speed	Decimal number with exactly one decimal place (e.g., 157.2)	0.0 when cleanly closed (since rc4)
8	Upload speed	Decimal number with exactly one decimal place (e.g., 21.5)	0.0 when cleanly closed (since rc4)
9	Upload queue count	Integer — number of clients in the upload queue	0 when cleanly closed
10	Shared file count	Integer — number of files currently shared	0 when cleanly closed
11	Nickname	The user's configured nickname string
12	Total bytes downloaded	Integer — cumulative bytes downloaded across all sessions
13	Total bytes uploaded	Integer — cumulative bytes uploaded across all sessions
14	aMule version	Version string, e.g. 2.3.3 or CVS
15	Session bytes downloaded	Integer — bytes downloaded in the current session	0 when connecting or cleanly closed (since rc4)
16	Session bytes uploaded	Integer — bytes uploaded in the current session	0 when connecting or cleanly closed (since rc4)
17	Uptime	Seconds aMule has been running	0 when cleanly closed (since rc6); see version notes below

Version history notes

• aMule 2.0.0-rc4: Introduced the 2 (connecting) status for line 1. Lines 2–5, 7, 8, 15, and 16 all report 0 / 0.0 when aMule is in connecting state or was cleanly closed.
• aMule 2.0.0-rc5: No format changes.
• aMule 2.0.0-rc6: Line 17 (uptime) changed from a human-readable string with unit (e.g., 3 mins) to an integer number of seconds. When aMule is cleanly closed, line 17 is now 0 (previously it was 00 secs).
• aMule 2.1.0: Line 6 (Kademlia status) was added. Files written by versions before 2.1.0 do not contain this line.

Complete example

The following is a valid amulesig.dat file while aMule is online:

1
eD2k Server
23.48.235.15
4661
H
2
157.2
21.5
521
34
Happy aMule user
23496736693
3296032695
CVS
143534593
23387432
3865

Decoded:

Line	Field	Value	Meaning
1	ED2K status	1	Connected
2	Server name	eD2k Server
3	Server IP	23.48.235.15
4	Server port	4661
5	ID type	H	High ID
6	Kad status	2	Kad connected (OK, not firewalled)
7	Download speed	157.2	157.2 KiB/s
8	Upload speed	21.5	21.5 KiB/s
9	Upload queue	521	521 clients waiting
10	Shared files	34	34 files shared
11	Nickname	Happy aMule user
12	Total downloaded	23496736693	~21.9 GiB total
13	Total uploaded	3296032695	~3.1 GiB total
14	Version	CVS	Development build
15	Session downloaded	143534593	~136.9 MiB this session
16	Session uploaded	23387432	~22.3 MiB this session
17	Uptime	3865	3865 seconds ≈ 64 minutes

Offline example

When aMule is cleanly closed, the file is left in the following state:

0
0
0
0
0
0
0.0
0.0
0
0
Happy aMule user
23496736693
3296032695
CVS
0
0
0

onlinesig.dat

eMule-compatible 2-line status file. aMule generates it for compatibility with eMule utilities. The native aMule status file is amulesig.dat, which carries far more information.

Format

Two content lines. aMule always joins them with a literal LF (0x0A), then writes the file through wxWidgets' text-file facility (wxTextFile), which appends a trailing newline using the host platform's native line ending (LF on Linux, macOS and BSD; CRLF on Windows).

When online:

Line 1: 1|<server name>|<server IP>|<server port>
Line 2: <download speed>|<upload speed>|<queue count>

When offline or cleanly closed:

Line 1: 0
Line 2: 0.0|0.0|0

Speeds are shown with exactly one decimal place.

Examples

Online:

1|eD2k Server|20.34.253.32|4661
20.3|12.9|134

Offline:

0
0.0|0.0|0

GeoLite2-Country.mmdb

Binary database in MaxMind DB format (.mmdb), used to look up the country of any IP address. The on-disk layout is the standard MaxMind DB format and is not aMule-specific. For how to obtain and configure the database, see the aMule Files Reference.

key_index.dat, src_index.dat and load_index.dat

Binary files that store the Kademlia network index data this client maintains as a Kad node:

• key_index.dat — keyword index: the keywords this client publishes to the Kad network, so other clients can search for files through it.
• src_index.dat — source index: the sources (which clients hold which files) this client publishes to the Kad network.
• load_index.dat — stores keyIDs of known Kademlia clients along with the date when each was last seen. Used to calculate load distribution across the Kad network.

All three files are internal to the Kad implementation and are not intended for manual editing.

statistics.dat

Small binary file storing aMule's lifetime traffic totals: the cumulative number of bytes ever uploaded and downloaded across all sessions. Introduced in 2.3.1; earlier versions kept these totals in the [Statistics] section of amule.conf (TotalUploadedBytes / TotalDownloadedBytes). aMule 3.0.0 removed the automatic migration of those legacy keys, so totals from 2.2.x or earlier are no longer imported.

Format

Offset	Size	Field	Description
0	1 byte	Version	Always 0x00 — identifies the current statistics.dat layout
1	8 bytes	Total uploaded	Cumulative bytes sent (64-bit unsigned, little-endian)
9	8 bytes	Total downloaded	Cumulative bytes received (64-bit unsigned, little-endian)